Loewe Individual 32 Compose Sound LED Operating Instructions Manual - page 127
127 -
english
Character table
Key assignment for text input via the remote control
For certain functions the input of letters or characters is required. As with
a cell phone press the numeric button (0-9) repeatedly until the desired
character appears.
➠ The characters available are language dependent.
Here the key assignment is for the menu language English.
Key
Character (uppercase - lowercase)
1
1
2
A B C 2 - a b c 2
3
D E F 3 - d e f 3
4
G H I 4 - g h i 4
5
J K L 5 - j k l 5
6
M N O 6 - m n o 6
7
P Q R S 7 - p q r s 7
8
T U V 8 - t u v 8
9
W X Y Z 9 - w x y z 9
0
0 [space] . / \ - + _ , ; : ? ! = & # % ~ @ $ * ´ | ( )
Tilting the TV set
You can set the tilt angle of your TV set on the table stand to 0° or 2.5°.
Tools required: Torx screwdriver T 20
Allen key 5 mm
First, loosen the topmost of the three retaining screws of the table stand
to get to the adjustment screw for the tilt angle (see illustration).
Then put the Allen key into the adjustment opening.
By screwing in the adjustment screw, you can adjust the tilt angle of the
TV set (turned to the left as far as it will go: 2.5°, to the right as far as
it will go: 0°).
When adjusting the tilt angle, position the TV set in the desired tilting
direction.
Please only use the tilt angle 0° or 2.5°. Intermediate positions are not
permitted and could damage the TV set.
➠ The table stand is delivered set at an angle of 2.5°.
➠ To adjust the tilt angle (turned to the left as far as it will go: 2.5°, to
the right as far as it will go: 0°), turn the screw with the Allen key
approx. 1.5 times.
➠ Do not overtighten the adjustment screw. This could damage the
TV set!
Screw the retaining screw back in again. Tighten it with a torque of ap-
prox. 2 Nm (hand-tight).
Input of characters
Tilting the TV set