M/A-Com P5100 Series Maintenance manual - page 15
PARTS LIST
SYMBOL
PART NO.
DESCRIPTION
.........................CAPACITORS..........................
C9
M29/17032400
Polypropylene: 8 uF, 660Vac, similar to Ronken
P61A24805H05.
.............................. FUSES ...............................
F1
M29/09013901
Non-time delay Glass/Ferrule Fuse: 10 amps,
250V; similar to Bussman AGC-10.
F2
M29/09013903
Normal Blow Fuse: 20 amps, 32V; similar to
Bussman AGC-20.
F3
M29/09016300
Slow Blow Fuse: 5 amps, 250V; similar to
Bussman MDL-5.
..............FUSE HOLDER & BLOCKS...............
M29/09014200
Fuse Holder, screwdriver slot design: similar to
Bussman "HTB-96I". (Used with F1 thru F3).
.........................CONNECTOR..........................
F801A
M29/40028600
Connector: 4 position; sim to AMP 641685-2.
J801
M29/40027400
Connector: 9 position; sim to Molex 03-09-1091.
.......................... RESISTORS ...........................
R1
M29/16012302
Wirewound Resistor: 30 ohms, 50 w; similar to
IRC PW-50E-30OHMS-5% (with bracket).
....................... RECEPTACLES ........................
RE1
and
RE2
M29/40027800
Receptacle: power, 3 wire grounding, 15 amps
at 125V.
...........................SWITCHES............................
S1
M29/20003300
SPST: 16 amps, 125V switch; similar to Carling
RA911VBBOV.
...................... TRANSFORMER .......................
T1
M29/289CV3
Ferro-Resonant Transformer.
...................... WIRE HARNESS .......................
W1
thru
W30
M29/289LW3
Wiring Harness.
W801
M29/11022301
Power Cord.
..................... MISCELLANEOUS ......................
M29/07062200
Top Cover.
M29/07063000
Front Panel.
M29/22043800
Machine screw, TORX head: 3.5m x 1/2;
Quantity 8; similar to Camcar/Textron Inc.
Secures cover.
M29/22044600
Machine screw, hex head; No. 8-32 x 5/8"
secures C9 to case.
M29/22041502
Hex nut: No. 8-32, quantity 4; secures C9, R1,
and ground wire to case.
M29/05065600
Bracket for C9.
M29/22041501
Hex nut: No. 6-32 x .250, quantity 10; used to
secure PCB,.
M29/22043201
Nylon Standoff: Quantity 7; Used to separate
PCB from case.
M29/11022000
Strain relief, black similar to Heyco 1200.
To secure W801 to case.
M29/22041504
Nut: 1/4-20 x 7/16, quantity 4; secures T1 to
case
M29/22041503
Nut: No. 10-32, quantity 4; used to secure
terminal lugs to PCB.
M29/22010305
Washer: #6, used to secure RE1/RE2.
M29/22044500
Nut, 3.5M: used to secure RE1/RE2.
*COMPONENTS ADDED, DELETED OR CHANGED BY PRODUCTION CHANGES.
12/24 VOLT POWER SUPPLY
19A149979P1
ISSUE 1
SYMBOL
PART NO.
DESCRIPTION
HEAT SINK / PCB ASSEMBLY
M29/91034501 (REV. 0)
(Assembly includes the following:)
......................... CAPACITORS...........................
C1
thru
C4
M29/17034301
Aluminum electrolytic: 27000 uF, 40V.
C5
M29/17034300
Aluminum electrolytic: 33000 uF, 25V; sim to
UCC KME25VB333M35X50LL.
C6
M29/17031500
Aluminum electrolytic: 27000 uF, 25V; sim to
UCC KME25VB273M35X50LL.
C7
M29/17034301
Aluminum electrolytic: 27000 uF, 40V. (Rev. B
& later).
............................. CHOKES...............................
L1
M29/289C5
Output Choke: .7mH, 15 amps.
L2
M29/289FC4
Output Choke: .4mH, 3 amps.
..........................RECTIFIERS ...........................
D1
thru
D4
M29/18030500
Dual Schottky Rectifier: 30 amps, 150V;
similar to GI FED30CP.
.......................... RESISTORS............................
R2
M29/116013800
Resistor: 100 ohm 10%, 10 watt.
........................... VARISTOR .............................
MOV1
M29/18008013
Varistor: 150V, 80j metal oxide.
.......................... TERMINALS ............................
TB1
thru
TB11
M29/13048100
FASTON tabs; similar to Amp 62650-1.
..................... MISCELLANEOUS.......................
M29/22045500
Pem stud: #10-32. Quantity 4, secures PCB.
M29/22041503
Keeper Nut: #10-32, 1/8" thick. Quantity 4,
secures PCB.
M29/22046700
Rivet: Quantity 2, secures L1.
M29/22025001
Flat washer: #10. Quantity 2, secures L1.
M29/11024400
Heatsink.
M29/31016703
Heat Transfer Pad: To insure good thermal
conductivity between D1-D4 and heat sink.
M29/22027710
Hex head screw: No. 4-40 x .5; quantity 4,
used to secure D1-D4 to heat sink.
LBI-38551C
15