Magicard Enduro Duo Getting Started Manual - page 8
4
Magicard Enduro
ENG
Printer Location requirements
Normal office environment with:
• A properly grounded power supply
• Ambient temperature +10 to 30
O
C (50 to 86
O
F)
• Protection from direct sunlight and chemicals
• Protection from abrupt temperature changes
• Relative humidity 20 - 70%
• Sufficient space for:
- opening the top cover
- cable access at the rear
FRA
Site d’installation de l’imprimante
Environnement de bureau normal avec :
• une mise à·la terre du circuit électrique
• une température ambiante comprise
entre +10 et 30
O
C
• une protection contre la lumière directe du soleil
et les émanations chimiques
• une protection contre les brusques
changements de température
• une humidité relative de 20 à 70 %
• un espace suffisant pour :
- ouvrir le capot supérieur
- accéder au câble à l’arrière
ESP
Requisitos de colocación de la
impresora
Entorno normal de oficina con:
• Fuente de alimentación con toma de tierra
• Temperatura ambiental de +10 a 30
O
C (de 50 a 86
O
F)
• Protección de la luz solar directa y productos
químicos
• Protección de cambios bruscos de temperatura
• Humedad relativa del 20 al 70 %
• Espacio suficiente para:
- abrir la tapa superior
- acceder al cable en la parte posterior
POR
Requisitos para a localização da
impressora
Ambiente de escritório normal com:
• fonte de alimentação devidamente ligada à terra
• temperatura ambiente entre +10 a 30
O
C (50 a 86
O
F)
• protecção contra a luz solar directa e produtos
químicos
• protecção contra alterações bruscas de
temperatura
• humidade relativa 20 - 70%
• espaço suficiente para:
- abrir a tampa superior
- aceder ao cabo na parte posterior
ITA
Requisiti del luogo di installazione
Normale ambiente di lavoro dotato di:
• Alimentazione di rete con messa a terra
• Temperatura ambiente compresa tra
+10 e 30
O
C (50 - 86
O
F)
• Protezione da agenti chimici e luce solare diretta
• Protezione contro sbalzi improvvisi di temperatura
• Umidità relativa 20 - 70%
• Spazio sufficiente per:
- aprire il coperchio superiore
- consentire l'accesso al lato posteriore con il cavo
DEU
Anforderungen bezüglich des
Aufstellortes des Druckers:
Normale Büroumgebung mit:
• einem ordnungsgemäß geerdeten Netzanschluss
• einer Umgebungstemperatur von +10 bis 30
O
C
(50 bis 86
O
F)
• Schutz vor direkter Sonneneinstrahlung und Chemikalien
• Schutz vor plötzlichen
Temperaturschwankungen
• relative Luftfeuchtigkeit von 20 bis 70 %
• ausreichend Platz:
-
zum Öffnen der oberen Abdeckung
-
für den Kabeleingang auf der Rückseite
CHI
打印机本地要求
普通办公环境应达到以下要求:
•
一个正确接地的电源
•
环境温度为 10 至 30 摄氏度(50 至 86 华氏度)
•
避免阳光直射与化学物质危害
•
防止温度急剧变化
•
相对湿度为 20 - 70%
•
空间要求:
-可打开上盖
-电缆可从后部接入
P
y
C
Printer Location requirements
Normal office environment with:
• A properly grounded power supply
• Ambient temperature +10 to 30
O
C (50 to 86
O
F)
• Protection from direct sunlight and chemicals
• Protection from abrupt temperature changes
• Relative humidity 20 - 70%
• Sufficient space for:
- opening the top cover
- cable access at the rear
POL
Wymagania dotyczàce ustawienia
drukarki
Zwykłe warunki biurowe, w tym:
• Odpowiednio uziemione zasilanie.
• Temperatura otoczenia w zakresie +10 do 30
O
C
(50 do 86
O
F)
• Zabezpieczenie przed bezpo
średnim
promieniowaniem słonecznym i działaniem
substancji chemicznych.
• Ochrona przed nagłymi zmianami temperatury.
• Wzgl
ędna wilgotno
ść 20–70%.
• Wystarczaj
ąca ilo
ść miejsca na:
- otwarcie górnej pokrywy,
- przewody z tyłu urz
ądzenia.
NLD
Eisen voor de locatie van de printer
Normale kantooromgeving met:
• Een goed geaarde stroomvoorziening
• Omgevingstemperatuur +10 tot 30
O
C (50 tot 86
O
F)
• Bescherming tegen direct zonlicht en
chemicaliën
• Bescherming tegen abrupte
temperatuurveranderingen
• Relatieve vochtigheid 20 - 70%
• Voldoende ruimte om:
-
de bovendeksel openen
-
kabeltoegang aan de achterkant
Enduro QSG multi language V8 - 08:Enduro QSG multi language V8- 08 16/6/08 09:15 Page 15