NAD T765 Owner's Manual - page 18
ANALOG AUDIO
The T 765 has nine analog audio inputs including 7.1 input. These analog inputs - Audio 1, Audio 2,
Audio 3, Audio 4, Audio 5, Audio 6, Audio Front, Audio MP and 7.1 Input can be variably assigned to
each Source.
Scroll to ‘Analog Audio’ and then press and then
to select and assign an analog audio input to
the particular Source. There are three choices – Audio, 7.1 Input or Off.
When ‘Audio’ is chosen, press and then
keys to select and assign the desired audio input – 1 to
6, Front and MP.
Select ‘7.1 Input’ to choose the audio signal fed to ‘7.1 Channel Input.’ If ‘Off’ is selected, no incoming
analog audio signal is selected by the particular Source.
NOTE
An incoming digital signal present at the assigned digital input will always take precedence over the
assigned analog audio input, even if both are present. To maintain the analog audio input for the
particular Source, select ‘Off’ at the ‘Digital Audio’ setting of the same ‘Source’ menu.
GAIN
Gain adjustment allows all sources to play back at the same volume so you don’t need to adjust the
volume every time a new source is selected. It is generally preferable to reduce the level of the loudest
source rather than making louder the softer sources.
Scroll to ‘Gain’, press and then
to step through the desired level from -12dB to 12dB.
DIGITAL AUDIO
To take advantage of the T 765’s high performance surround and digital audio circuitry, it is advisable
that its Digital Audio inputs are selected.
There are two types of Digital Audio input for the T 765. These are Optical and Coaxial digital inputs. A
third option is ‘Off’ whereby no incoming digital audio signal is selected by the particular Source.
The desired digital audio input for a particular Source can be selected by scrolling to ‘Digital Audio’,
press and then
to step through the desired digital input source. After finalizing the desired type
of Digital Audio input, press and then
again to select the specific Digital Audio input.
There are eleven Digital Audio inputs selectable for the T 765. They are the following
HDMI
« HDMI 1, HDMI 2, HDMI 3, HDMI 4
Optical
« Optical 1, Optical 2, Optical 3, Optical Front
Coaxial
« Coaxial 1, Coaxial 2, Coaxial 3
NOTE
An incoming digital signal present at the assigned digital input will always take precedence over the
assigned analog audio input, even if both are present. To maintain the analog audio input for the
particular Source, select ‘Off’ at the ‘Digital Audio’ setting of the same ‘Source’ menu.
VIDEO
There are four types of video input a particular Source could be assigned. These are HDMI, Component,
S-Video and Video inputs. A fifth option is ‘Off’ wherein the particular Source is prompted not to select
any Video input.
Navigate through the Video input selections by pressing and then
to step through the
selections. The following are the assignable Video inputs
HDMI
« HDMI 1, HDMI 2, HDMI 3, HDMI 4
Component Video
« Component 1, Component 2, Component 3
S-Video
« S-Video 1, S-Video 2, S-Video 3, S-Video 4, S-Video 5, S-Video Front
Video
« Video 1, Video 2, Video 3, Video 4, Video 5, Video Front
OPERATION
USING THE T 765 – SETUP MENU
18
ENGLISH