NAD T765 Owner's Manual - page 31

A/V PRESETS

The T 765’s simple but powerfully flexible system of ‘Presets’ allows you to customize virtually every 

aspect of your audio-video playback, and recall them with a single key-press. The parameters ‘Listening 

Mode,’ ‘DSP Options’ and ‘Tone Controls’ accessible via the ‘Main Menu’ together with ‘Speaker Setup 

and ‘Display Setup’ configurable through ‘Setup Menu’ are stored together as a Single Preset.

You might create one Preset optimized for pop music and another for classical. One more Preset can be set 

up to recall each family member’s favorite setting or one for fully cinematic home-theater playback and yet 

another one for late-night movies, with each Preset fine-tuned to a particular scenario or preference.

CREATING PRESETS

Creating a Preset consists simply of storing a complete set of the parameters set forth in the ‘Listening 

Mode,’ ‘DSP Options’ and ‘Tone Controls’ accessible via the ‘Main Menu’ together with ‘Speaker Setup 

and ‘Display Setup’ configurable through ‘Setup Menu.’

Scroll to ‘A/V Presets’ using the 

 keys to save a collection of said parameter settings to a Preset. 

Select a Preset number and by a combination of pressing the 

 keys, you can selectively include in 

the particular Preset any of the above-mentioned parameter settings by choosing ‘Yes’. If you decide 

not to include in the particular Preset a certain parameter setting, select ‘No’.

Now in order to save the settings chosen for the particular Preset number, scroll down to ‘Save Current 

Setup to Preset’ and press the   key. If you chose to load instead the default settings, scroll down to 

‘Load Defaults to Preset’ and press the   key to restore the default settings. 

In addition to the parameter settings, the Preset label itself can be assigned a new name. This new 

Name will be shown in the VFD as well as on the OSD. 

To rename the Preset label, scroll to ‘Name’ and press   to go the character. Then, press 

 to pick 

and select through the alphanumeric selections. Press 

 to move to the next character or back to 

the previous character and at the same time save the changes done on the current character.

NOTE

The selected Preset remains in force until you select a different Preset.

RECALLING PRESETS

You may recall a Preset at any time using the HTR 3 remote control. Press the HTR 3’s square AVPS key 

and then the numeric key 1-5 corresponding to the desired preset number. The newly recalled Preset 

will then manifest or replace the previous Preset (if any).

OPERATION

USING THE T 765 – SETUP MENU

31

ENGLISH