Nautilus BE STRONG E916 Service Manual - page 22
22
Table2–4.contactHeartRateMonitor(cHR)
Problem
Potentialcauses
Remedy
CHR on a swingarms does not
work.
The cables not plugged into the
back of the console.
• Plug cables into the back of the
console.
The cables are incorrectly plugged
into the back of the console.
• Check to make sure cables are
plugged in correctly.
The cable is not plugged into the
contact plate on the grip.
• Plug the cable into the contact
plate.
A screw has pierced through the
cable(s).
• Replace the cable(s).
The contact heart rate board is not
functioning.
• Replace the CHR board in the
console.
CHR on the fixed handle assembly
does not work.
The cables not plugged into the
back of the console.
• Plug the cables in the console.
The cables are incorrectly plugged
into the back of the console.
• Make sure the cables are
properly connected to the
console.
The cable is not plugged into the
contact plate on the grip.
• Plug the cable into the contact
plate.
A screw has pierced through the
cable(s).
• Replace the cable.
The Contact Heart Rate (CHR)
board is not functioning.
• Replace the CHR board.
commonElectricalProblemsandPotentialcauses