Nautilus BE STRONG E916 Service Manual - page 25
Other manuals for BE STRONG E916:
Service Manual, Specifications, Assembly Manual, Assembly Manual, Owner's Manual
of
50
2
Nautilus® Commerical Series Elliptical Service Manual
Check that the
voltage between
U1 heatsink (GND)
and pin 1 reads
6VDC.
Is
the voltage
good?
Replace the cable.
End
Check that the
voltage between
U1 heatsink (GND)
and pin 3 reads
5.5 to 6VDC.
Is
the voltage
good?
Replace the
Processor/
Controller PCBA.
Replace the lens.
End
Previous
Page
No
Yes
No
Yes
TroubleshootingFlowcharts