NEC ElectraElite IPK Installation And Maintenance Manual - page 46
SPE Hardware, Installation, and Maintenance Manual
C - 1
___________________________________________________________________________________
___________________________________________________________________________________
Appendix C
Configuration Examples and MISC
S
ECTION
1
S
AMPLE
C
ONNECTION
C
ONFIGURATION
This example shows how the MIF(M)-U( ) ETU can connect/monitor the applications
from one connection using the Ethernet Connection.
The Serial or Modem can be used for the same connection.
Assuming that the laptop has been configured to communicate with the SPE(M)-U( )
ETU via Ethernet, and the SPE ETU serial ports have been configured for the
appropriate baud rate, parity, and stop bits.
One SPE(M)-U( ) ETU is provided with each card, additional cables can be purchased
separately.