NEC ElectraElite IPK Installation And Maintenance Manual - page 55
C - 10
Configuration Examples and MISC
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 1
Electra Elite IPK
LED Boot Procedure
All LEDs, except for Live (DS3), will light solid during the boot up process. Once the
SPE(M)-U( ) ETU finishes the boot up process all LEDs will go dark momentarily. The
Live (DS3) LED will still be flashing.
Step 4.
Remove the SPE(M)-U( ) ETU from the system, and return DIP switch
SW4-2 to the OFF Position.
Off = Save Settings (Default)
Step 5.
Reinsert the SPE(M)-U( ) ETU back into the system.
S
ECTION
4
SPE(M)-U( ) ETU C
ONFIGURATION
— CLI
This option is used for advanced technical personnel.
CAUTION: NEC highly recommends that changes not be made to this option.