Oki FAX 5250 Handbook - page 135

|

Handbook

135

The display tells you to replace paper even though

there is paper in the paper tray.

• Make sure that the paper is properly stacked in the tray,

then check for a paper jam in the paper feed path.

Your documents jam in the scanner.

• Check the document for wrinkles, tears or other damage. If

it is damaged, try making a copy of the document on a

photocopier and faxing or scanning the copy.

• Make sure there are no staples or paper clips and that the

paper is clean and dry.

• Make sure the document is not wider than your fax

machine can load.

Your fax machine won’t dial.

• Check the power cord and wall outlet.

• Make sure that your telephone line (not your external

telephone or handset) is connected to the LINE outlet on

the back of your fax machine. Refer to the “Installation,

Connecting the Telephone Line” section of this handbook.

• If you have an external telephone connected, lift the

handset and check for a dial tone. If you do not hear one,

there may be a problem with your telephone line. If you do

hear a dial tone, your fax machine may be using the wrong

dialing method (pulse or tone) for your area. If you hear

changing tones instead of dialing pulses and you know that

your area uses pulse dialing, you should adjust the setting

for Dial Parameter 

MF(TONE)/DP(PULSE). Refer to the

“Setting Basic Features, Dial Parameter Settings” section

of this handbook.