Oki FAX 5250 Handbook - page 55

|

Handbook

55

Distinctive Ring: User Function 12

Some telephone carriers offer a service called Distinctive

Ring. Distinctive Ring lets you have different numbers on

one line, each with its own distinctive ring. You can then

use one number exclusively as a fax number without the

expense of a second line. (Your local telephone carrier can

provide you with more information about this service,

which usually has an additional charge.) To use this

function, refer to Setting Your Fax Machine’s Ring Pattern

below. Available settings are OFF (default) and ON.

!

You must have your local telephone carrier’s Distinctive

Ring service.Your fax machine must be in FAX answer

mode, and the PBX dial parameter must be set to OFF.

Other modes—TEL, TEL/FAX, or TAD—will override

Distinctive Ring.This feature may not work properly if

you have a telephone other than a genuine Oki optional

handset connected to your fax machine.

Setting Distinctive Ring

To set up your fax machine to recognize another ring pattern:

1 Press the Select Function key.

2 Press the 9/User Program One Touch key.

The display shows

1:FUNC. PROGRAMMING.

3 Press the Yes 

§ key. The display shows

FUNCTION NO. [ ].

4 Using the numeric keypad, enter 12. The display shows

DISTINCTIVE RING, OFF.

5 Press the No 

© key two times. The display changes to

DISTINCTIVE RING, SET.

6 Press the Yes 

§ key. The display changes to

SETUP FAX RING

CALL FAX NUMBER NOW