Oki FAX 5250 Handbook - page 61

|

Handbook

61

3 Your fax machine will grip the documents and pull the

bottom page into the machine.

4 To obtain the best possible quality for the type of

document you are scanning or faxing, use the Yes 

§ key

to set the resolution of your document. For most normal

documents, the default STD setting works well.

For normal office documents, use STD (Standard)

resolution, which scans at 200 x 100 dpi

For documents with small type or other fine details, use

• FINE resolution, which scans at 200 x 200 dpi

or

• EX. FINE resolution, which scans at 200 x 400 dpi

For documents with photos or many shades of gray, use

PHOTO resolution, which scans at 200 x 200 dpi

5 If necessary, use the No 

© key to adjust the level of

contrast in your document. For most documents, the

default NORMAL setting works best.

• For documents with normal contrast, use NORMAL

contrast.

• For documents that are too light, use LIGHT contrast.

• For documents that are too dark, use DARK contrast.

6 Your documents are now ready for faxing or copying.

Sending a Fax to a Single Location

1 Load your documents. 

2 Select a location. Refer to the instructions below.

To dial using a One Touch key

Press the One Touch key.

To dial using an Auto Dial number

Press the Auto Dial key, then enter the two-digit Auto Dial

number on the numeric keypad.

To dial using the numeric keypad

Dial as you would on a normal telephone.

If you make a mistake, press the Yes 

§ key to go back and

re-enter the number.

Press the Start key when you have finished entering

numbers.

To dial using an external telephone

Pick up the handset of your external telephone and dial the

number of the machine you wish to transmit to. If the

receiving fax machine is in automatic reception mode, you