Oki FAX 5250 Handbook - page 138

138

OKIFAX 5250

|

Your fax machine does not answer the phone or

receive faxes.

• First make sure that your fax machine is turned on and the

power cord is connected to the AC outlet.

• If you have a handset connected to your fax machine,

check that there is a dial tone on the phone line.

• Check the reception mode you are using. Your fax

machine will not automatically receive faxes in manual

answering mode [TEL]. In TAD mode, the answering

machine answers the call first. Refer to the “Setting Basic

Features, Answering Mode” section of this handbook.

Your received documents are light or have vertical

streaks on them and you are not out of toner.

• First, print a cleaning page. Press the Select Function key,

then press the 10/Msg. Print from Memory key, then press

the Yes 

§ key.

• If that doesn’t help, gently wipe the lens surface of the

LED array with a soft pad moistened with rubbing alcohol,

and then see if the machine works properly. Refer to the

“Problem Solving, Replacing the Toner Cartridge” section

of this handbook.

• If your fax machine still does not work properly, remove

the image drum unit. Refer to the “Problem Solving,

Working with the Image Drum Cartridge” section of this

handbook. Tap the toner cartridge and replace the

assembly.

• If this does not work, you may need to replace your image

drum cartridge.

You set your fax machine for delayed transmission

but it did not send.

• Check the display to make sure that you have set the clock

to the correct time. Refer to the “Setting Basic Features,

Changing the Date and Time” section of this handbook.

Your fax machine disconnected before you could

answer a voice request.

• You must answer a voice request while the warbling tone

is sounding. When you hear the warbling tone, press the

Voice Request key after picking up your handset.