Oki FAX 5250 Handbook - page 58

58

OKIFAX 5250

|

!

Some PBX installations may require additional

adjustments to your fax machine. If you continue to

have difficulty with fax communication after following

these steps, contact your Authorized OKIFAX Dealer.

 1 Press the Select Function key.

 2 Press the 9/User Program One Touch key.

 3 On the numeric keypad, press 2. The display shows

2:DIAL PARAMETER.

 4 Press the Yes 

§ key until the display shows

PBX LINE, [OFF].

 5 Press the No 

© key. The display changes to

PBX LINE, [ON].

 6 Press the Yes 

§ key until the display shows

DIAL PREFIX, [OFF].

 7 Press the No 

© key. The display changes to

DIAL PREFIX, [ ] ENTER 4DIGITS.

 8 Using the numeric keypad, enter the number you normally

dial from your PBX to obtain an outside line. An example

of this is dialing 9 before the number, such as 9-555-1212.

 9 Press the 14/Space One Touch key repeatedly until the

display changes.

10 Press the Yes 

§ key.

11 Press the Select Function key to finish. Keep in mind that

all of the outside telephone numbers you program into

your fax machine have to begin with your PBX’s access

digit.

!

To turn off the PBX LINE and DIAL PREFIX

functions, follow Steps 1-7 above. At Step 8, press the

Space key four times. Then skip to Step 10.