P&E Microcomputer Systems XPC560P EVB User Manual - page 12
of
53
8
xPC560P EVB User Manual
J4 – VPROG Regulators Control
J5 – Regulators Enable & Standby
Jumper
Setting
Position
Effect
1+2
On
V
KAM
regulator output is programmed to 1V
Off
(default)
V
KAM
regulator output is programmed to 1.5V
3+4
On
V
STBY
regulator output is programmed to 2.6V
Off
(default)
V
STBY
regulator output is programmed to 3.3V
5+6
On
V
DLL
regulator output is programmed to 2.6V
Off
(default)
V
DLL
regulator output is programmed to 3.3V
Jumper
Setting
Position
Effect
1+2
On
The power regulator is always on
Off
(default)
The power regulator is in standby if jumpers
5+6 are also in the “off” position