P&E Microcomputer Systems XPC560P EVB User Manual - page 16
of
53
12
xPC560P EVB User Manual
below has the correct pins listed.
J9 – Buttons Driving Configuration
Selects whether the buttons drive logic high or drive logic low when pressed.
Jumper Setting
Effect
1+2 (default
on)
KEY1 connected to PD0
3+4 (default
on)
KEY2 connected to PD1
5+6 (default
on)
KEY3 connected to PD2
7+8 (default
on)
KEY4 connected to PD3
Jumper Setting
Effect
1+2
When pressed, buttons will send logic high to the
connected I/O pin
2+3 (default)
When pressed, buttons will send logic low to the
connected I/O pin