P&E Microcomputer Systems XPC560P EVB User Manual - page 34
of
53
30
xPC560P EVB User Manual
Figure 4-1: Boot Configuration Jumpers
4.2
Power Configuration
When the xPC560P Mini-Module is plugged into the xPC56XXMB
motherboard, power is supplied directly by the motherboard. In this setup, the
external power supply input available on the Mini-Module should NOT be
used.
When the xPC560P Mini-Module is used as a stand-alone board, an external
Jumper Setting
Effect
1+2
The ABS[2] pin is pulled up logic high
2+3 (default)
The ABS[2] pin is pulled down logic low