P&E Microcomputer Systems XPC560P EVB User Manual - page 22
of
53
18
xPC560P EVB User Manual
J30 – LIN2/SCI RxD selection
Controls whether the RxD pin on LIN2 or SCI is connected to the default I/O pin on
the MPC560xP processor.
Figure 3-5: LIN2 schematic (Not populated by default)
3.5
SCI
One SCI interface is available on the xPC56XXMB.
Jumper Setting
Effect
1+2
The LIN2 RxD pin is connected to the “F7” pin on the
MPC560xP processor. This should be set if enabling
LIN2.
2+3
The SCI RxD pin is connected to the “F7” pin on the
MPC560xP processor.