P&E Microcomputer Systems XPC560P EVB User Manual - page 15
of
53
xPC560P EVB User Manual
11
Figure 3-2: LEDs circuitry schematic
3.3
Buttons
There are four user buttons available on the xPC56XXMB.
J8 – Buttons Enable
Controls whether the buttons on the xPC56XXMB motherboard are
connected to I/O pins of the processor. The jumpers can be removed and
wires can be used to connect each button to any processor I/O pin, if desired.
Please note that although the schematics indicate that the processor I/O pins
are eMIOSx, those are not the I/O pins for the xPC560P EVB. The table
1+2 (default
on)
LED1 connected to PD4
3+4 (default
on)
LED2 connected to PD5
5+6 (default
on)
LED3 connected to PD6
7+8 (default
on)
LED4 connected to PD7