QRS Music Technologies PMII Installation Manual - Adjustment Procedures
Adjustment Procedures
35
July 2013
Establish a Wireless Connec on and Power ON
Wirelessly connect your iTouch, iPad, Wireless Computer or Android Phone to the piano’s Wi‐Fi Adapter.
[Se ngs / Wi‐Fi / click on the QRSPNO ### device]
Open your Safari, Google Chrome or Android internet browser.
In the address box type: QRSPNO , h p://qrspno/qrs or h p://192.168.1.1/qrs and refresh your browser.
Press the Power ON bu on
Verify Opera on
Connect to Power and Turn ON to Standby Mode
Plug the AC power cord into a wall outlet.
Flip the power supply switch to the “ON” posi on.
PNOma on II will take several minutes to turn on the Low Voltage.
During this power‐on/boot sequence PMII is loading the opera ng system and indexing the music on the SD card. You
may remove the SD card for faster boot me during ini al setup and service.
Note: Once removed, the SD card must be re‐inserted before flipping ON the power supply switch.
The system has booted and is in standby when PLx lights stop scanning and the Power light is yellow.
The “Power”, “System” and “Network” lights should be green.
Power System
Network
Mode MIDI AMI