QRS Music Technologies PMII Installation Manual - Introduc On
Introduc on
6
July 2013
Make Certain that the Kit will Fit!
All kits play 80 notes, excluding the first and last 4 keys of the standard piano keyboard. The following ques ons
should be asked before beginning an installa on:
1. Is it a grand or upright piano? The kit will not fit into a spinet piano.
2. Is the keybed made of wood or a wood‐veneered laminate?
3. Does the piano have a range of 88 notes, extending from low A to high C?
4. Is the keyframe made of wood?
5. Is the piano well‐regulated and in good mechanical condi on?.
6. Does the piano have sufficient space beneath the soundboard or inside an upright to mount the pedal solenoid &
power supply (5.25" x 5.25" x 12.5")?
7. Can the back of the key frame be cut away 1 3/16"?
Tools Needed
Paper
Wood Chisel
Pencil
Awl
Measuring Tape
Wood Glue
Long Straightedge
Spray Paint (Black)
Adjustable Frame Square
Sandpaper (Assortment)
Screwdriver (Assortment)
Palm Sander (Op onal)
Power Screwdriver (Op onal)
Jig Saw
Socket (Assortment)
Jig Saw Blades (Assortment)
11/32” Nut Driver
Power Drill (Right Angle Op onal)
5/16” Nut Driver
Drill Bits (Assortment)
Hammer
1‐3/4” Forstner Bit or Flat (paddle) Bit
Hacksaw
Center Punch
Metal File
Circular Saw ‐ 7 1/2” blade (Op onal)
Rasp
Router (Op onal)
U lity Knife
Vacuum Cleaner
Plas c Cu ng Board