Raymarine ST60 Tridata Owner's Handbook Manual - Water Temperature
4
ST60 Speed Instrument Owner’s Handbook
Water temperature
The water temperature is shown in either degrees Celsius or Fahrenheit, as set
during calibration (see
Chapter 4, Calibration
).
Timers
The
timer
key gives access to a count-up timer and to two race-start timers.
Times are either in seconds (S) or minutes (M), depending on the counter values.
Refer to the
Using timer key
flow diagram to display the required timer.
D4365-3
Count-up
timer
Race-start
timer 1
Race-start
timer 2
timer
or for 1 s to reset timer to the start value.
Press
either momentarily
to start timer, or for lap time (when running)
reset
timer
to decrease the value
reset
to increase the value
timer
timer
timer
To enter/leave
adjust mode, press
timer
reset
and
momentarily
Race-start timer adjust
To set a different value, press
timer
reset
and
momentarily
To enter/leave
adjust mode, press
Using timer key