Sabiana DUCK STRIP Installation And Maintenance Manual - page 3
3
3A
DUCK STRIP HA TRE
VANTAGGI FONDAMENTALI
RISPETTO A TUTTI GLI ALTRI
PRODOTTI.
1 - RESA TERMICA RADIANTE
ELEVATA.
Duck Strip ha una resa termica
più elevata delle termostrisce
normali grazie al sistema inno-
vativo brevettato da Sabiana.
L’aderenza dei tubi, in cui passa
il fluido riscaldante, al pannello
radiante è completa ed è equipa-
rabile a quella ottenuta per
espansione (mandrinatura) dei
tubi nella fabbricazione delle
batterie di scambio termico.
In questo modo, la temperatura
media del pannello si innalza
e la resa per irraggiamento è
maggiore.
2 - Il DESIGN INNOVATIVO di
Duck Strip consente di avere una
parte della superficie dei tubi
in vista ed una completamente
avvolta nel pannello. I tubi, oltre
a riscaldare il pannello, irraggiano
il calore direttamente nell’ambien-
te migliorando la resa termica.
I tubi sono tutti dello stesso
diametro e sono disposti a passo
regolare in modo da avere una
temperatura radiante più uniforme
possibile in tutti gli otto modelli.
3 - FINITURA PERFETTA.
Il pre-trattamento di fosfatazione
a caldo e di verniciatura a polvere
con resine epossipoliesteri e
successiva essicazione a forno
a 180°C, assicurano a Duck Strip
resistenza elevata ed estetica
perfetta. Le termostrisce sono
disponibili in due colori standard,
RAL 9002 grigio chiaro e RAL
9010 bianco e, a richiesta e con
piccolo sovrapprezzo, in molti
altri colori della serie RAL.
DUCK STRIP HAVE GOT
THREE FUNDAMENTAL
ADVANTAGES IN
COMPARISON WITH
ALL SIMILAR PRODUCTS.
1 - HIGH THERMAL RADIATION
POWER.
Duck Strip have got a higher
thermal output than the normal
radiant strips thanks to the
innovative, patented system of
Sabiana. The tubes completely
adhere to the radiant strip and
this system can be compared
with the expansion of tubes in
the production of heat exchange
batteries. In this way the average
temperature of the strips and
the irradiation output are higher.
2 - Moreover, due to the
INNOVATIVE DESIGN of Duck
Strip, one part of the surface of
the tubes is visible and the other
part is completely housed in the
strip. The tubes heat the strip
and at the same time irradiate the
heat directly into the environment
so that the thermal output is
improved. All the tubes have got
the same diameter and are layed
in a regular distance so to obtain
a highly uniform irradiation
temperature on all the eight
models.
3 - PERFECT FINISHING. The
pre-treatment by phosphatizing,
coating with epoxy-polyester
powder and successive oven
drying at 180°C provides Duck
Strip with a high resistance and
a perfect aesthetical aspect. The
radiant strips are available in two
standard colours: RAL 9002 light
grey and RAL 9010 white. On
request can be delivered against
a small extra price many other
colours of the RAL series.
DUCK STRIP
ZEICHNET SICH DURCH DREI
GRUNDSÄTZLICHE VORTEILE
GEGENÜBER ALLEN ANDEREN
PRODUKTEN AUS.
1 - ERHÖHTE
STRAHLUNGSLEISTUNG.
Die Deckenstrahlplatten Duck Strip
haben eine höhere Strahlungsleistung
als die normalen Strahlplatten, weil
sie auf einem innovativen und
patentierten System beruhen, das
von Sabiana entwickelt wurde. Die
Rohre, durch welche die Heizflüssig-
keit gelenkt wird, liegen eng auf der
Strahlplatte auf und das Verfahren
ist zu vergleichen mit der Expansion
(Aufweitung) von Rohren bei der
Fertigung von Wärmeaustausch-
batterien. Dadurch erhöht sich die
durchschnittliche Temperatur und
gleichzeitig verbessert sich die
Strahlungsleistung.
2 - Außerdem sorgt das NEUE
DESIGN von Duck Strip dafür, dass
ein Teil der Rohroberfläche sichtbar
bleibt und der andere Teil komplett
in die Strahlungsplatte integriert
ist. Die Rohre erwärmen die Platte,
geben die erzeugte Wärme direkt
an die Umgebung ab und erreichen
dabei eine hohe Heizleistung. Die
Rohre haben denselben Durch-
messer und sind in einem gleich-
mäßigen Abstand angeordnet,
sodass bei allen acht Modellen die
Strahlungstemperatur fast uniform ist.
3 - PERFEKTE VERARBEITUNG.
Durch die Vorbehandlung, d. h.
Warmphosphatierung, Lackierung
mit Epoxypolyesterpulvern und
anschließende Ofentrocknung bei
180°C erhält Duck Strip eine hohe
Resistenz und ein perfektes Äußeres.
Die Strahlplatten stehen in zwei
Standardfarben zur Verfügung: RAL
9002 hellgrau und RAL 9010 weiß.
Gegen einen kleinen Aufpreis
können sie je nach Bedarf in vielen
anderen Schattierungen der RAL-
Serie geliefert werden.
DUCK STRIP A TROIS
AVANTAGES IMPORTANTS
PAR RAPPORT À TOUS
LES AUTRES PRODUITS
SIMILAIRES.
1 - PUISSANCE THERMIQUE
RAYONNEMENT ELEVEE.
Grâce à un nouveau système
breveté, Duck Strip a une puis-
sance thermique plus élevée que
les panneaux rayonnants normaux.
L’adhérence des tubes de passage
du fluide thermique à la plaque
rayonnante est complète et peut
être comparée avec l’adhésion
obtenue par expansion (dudgeon-
nage) des tubes dans la production
de batteries d’échange thermique.
De cette façon la température
moyenne du panneau et la puis-
sance thermique sont augmentées.
2 - De plus, grâce au DESIGN
INNOVATEUR de Duck Strip, une
partie de la superficie des tubes
est en vue et l’autre partie est
complètement enfermée dans le
panneau. Les tubes chauffent le
panneau et rayonnent la chaleur
directement dans le milieu, en
augmentant la puissance thermi-
que. Tous les tubes ont le même
diamètre et sont installés a distance
régulière pour garantir une tempé-
rature de rayonnement uniforme
pour l’ensemble des huit modèles.
3 - FINITION PARFAITE.
Le prétraitement de phosphatation
à chaud, peinture à poudre avec
des résines époxy et étuvage au
four à 180°C garantissent an Duck
Strip une résistance élevée et un
aspect extérieur parfait. Les pan-
neaux rayonnants sont disponibles
en deux couleurs standard, RAL
9002 gris clair et RAL 9010 blanc.
Sur demande et contre une petite
majoration du prix les panneaux
peuvent être livrés en nombreux
couleurs de la série RAL.
DUCK STRIP OFRECE TRES
VENTAJAS FUNDAMENTALES
CON RESPECTO A TODOS
LOS OTROS PRODUCTOS.
1 - RENDIMIENTO TERMICO
RADIANTE ELEVADO.
Duck Strip tiene un rendimiento
térmico más elevado de los pane-
les radiantes normales gracias al
sistema innovativo patentado por
Sabiana. La adherencia de los
tubos por donde pasa el fluido
calentador al panel radiante es
completa y es equiparable a la
obtenida por expansión de los tubos
en la fabricación de las baterias
de cambio térmico. De este modo,
la temperatura media del panel
aumenta y el rendimiento por
irradiación es mayor.
2 - Además, el DESIGN INNOVA-
TIVO de Duck Strip consiente tener
en vista una parte de la superficie
de los tubos y otra parte completa-
mente envuelta en el panel. Los
tubos, además de calentar el panel,
irradian el calor directamente en el
ambiente mejorando el rendimiento
térmico. Los tubos son todos del
mismo diámetro y están dispuestos
a paso regular de forma a obtener
una temperatura radiante la más
uniforme posible en sus ocho
modelos.
3 - ACABADO PERFECTO.
El pre-tratamiento de fosfatación
en caliente y de barnizado a polvo
con résinas eposipoliesteres y
sucesiva desecación en horno a
180°C, aseguran a Duck Strip una
resistencia elevada y una estética
perfecta. Los paneles radiantes
están disponibles en dos colores
estandard, RAl 9002 gris claro y
RAL 9010 blanco, y a petición, y
con un pequeño aumento de precio,
en muchos otros colores de la serie
RAL.