SmartVent Synergy 190 User Manual - page 32
29
To deactivate Normal Heat Boost mode
either turn the Heat Boost OFF on the
HEAT BOOST page or change to another
Heat Boost mode.
The OVERRIDE page will be displayed:
To enable the Override mode press the
Override tab:
Use the and arrows to select the
number of hours that you wish the Heat
Boost to turn ON for (1, 2, 4 or 6 hours).
OVERRIDE HEAT BOOST MODE
Override mode allows you to turn the
Heat Boost ON, irrespective of any
temperature settings.
Return to the Heat Boost page by
pressing the Back button
The Override tab border is now
highlighted blue indicating this mode is
operative:
Note:
Once this setting is confi rmed the Heat Boost
will instantly turn ON. After the time has
elapsed, the Heat Boost will turn OFF and the
system will revert back to the previous active
mode (either Normal or Timer mode). If you have
not used either before enabling the Heat Boost it
will revert to Normal Mode (default).
To deactivate Override Heat Boost mode
either turn the Heat Boost OFF on the
HEAT BOOST page or change to another
Heat Boost mode.
When you have chosen how long you
wish to run the Heat Boost for, press
the ON/OFF button to read ON so that
border is highlighted red, indicating the
Override mode is now active.