SmartVent Synergy 190 User Manual - page 6
MY SETTINGS
MY SYNERGY
MON 13:15
MY SYNERGY
Room Temperature
19˚C
Air Source
Outside
Fan Speed
High
MY SYNERGY
SYSTEM
SETTINGS
15 MAR
13:15
SmartVent
MY SETTINGS
MY SYNERGY
MON 13:15
MY SYNERGY
Room Temperature
19˚C
Air Source
Outside
Fan Speed
High
MY SYNERGY
SYSTEM
SETTINGS
15 MAR
13:15
SmartVent
3
BOOST FAN
The Boost Fan function is used to
increase Synergy’s fans to their
maximum speed for a 15 minute
interval. Useful when the home
environment is experiencing a build
up of toxins (e.g. cigarette smoke,
cooking smells) or high levels of
humidity in specific areas of the
house.
To enter the Boost Fan mode, press the
‘fan’ icon on the Home page:
Confirm
Cancel
Confirm turn Boost Fan ON?
CONFIRM
Use the Boost fan when you want
to recover extra warmth from
moisture produced, e.g. when
having a shower. When ON the
fan will switch to high for 15
mins and the Home page icon will
flash.
BOOST FAN
OFF
ON
The BOOST FAN page will show the
status of the Boost Fan. It is OFF when
the OFF tab is highlighted with a blue
border.
To activate the Boost Fan
Press the ON tab:
Once confirmed, the Home page will
display with the ‘fan’ icon flashing on/off
every half second. This icon will continue
to flash for 15 minutes while the fan is
in Boost mode. After 15 minutes the fan
icon will stop flashing and the fans will
return to their last fan speed setting.
To deactivate the Boost Fan when ON
The Boost Fan can be deactivated before
the 15 minutes have expired. Press the
flashing ‘fan’ icon, this will take you to
the BOOST FAN page. This page will
show the ON tab highlighted with a blue
border.
A CONFIRM page will prompt you to
confirm your decision. Press Confirm to
turn Boost Fan ON: