Tait TM8250 Operator's Manual - (476.4 To 477.4Mhz)

For your safety 13

■

United States Federal Communications Commission, 

Code of Federal Regulations (CFR) Title 47 Parts 1.1307, 

1.1310, and 2.1091.

■

American National Standards Institute (ANSI) / Institute 

of Electrical and Electronic Engineers (IEEE) C95.1-1992.

■

Institute of Electrical and Electronic Engineers (IEEE) 

C95.1-1999 Edition.

This radio complies with the IEEE and ICNIRP exposure limits 

for occupational/controlled RF exposure environments at 

operating duty factors of up to 50% talk to 50% listen.

Radio frequency emissions limits in the USA

Part 15 of the FCC Rules imposes RF emission limits on 

receivers.

This radio complies with Part 15 of the FCC Rules. Operation 

is subject to the condition that this device does not cause 

harmful interference.

Frequency band reserved for distress beacons

Frequency band 406 to 406.1MHz is reserved for use by 

distress beacons. Transmissions should not be made within 

this frequency band.

Australia and New Zealand citizens band 

(476.4 to 477.4MHz)

AS/NZS 4365 deals with the use of frequencies in the 

476.425 to 477.400MHz band. Products capable of 

operating in this band have been approved for operation in 

the UHF Citizens Band Radio Service which is licensed in 

Australia by the ACMA Radiocommunications (Citizens Band 

Radio Stations) Class Licence and in New Zealand by the 

MED General User Radio Licence for Citizens Band Radio. 

Operation is subject to conditions contained within those 

licences.

Repeaters operate by receiving a transmission on one 

channel and re-transmitting it on another. Operators are 

required to avoid using local repeater input channels, which