Tait TM8250 Operator's Manual - Press Select. The Message
Operating in conventional mode 61
2
In the Set Status menu, scroll
through the list of status
messages until the message
you want appears.
3
Press Select. The message
Status updated appears in
the display.
Transmitting at low power
If you want to transmit at low power, you can override your
radio’s programmed power settings. To change to low-power
transmit on your current channel, you may be able to either:
■
use a programmed function key, or
■
use the Main menu.
Activating low power transmit by using a
function key
1
Press the function key programmed for low-power trans-
mit to transmit at low power on your current channel.
The message Low power
tx activated appears in the
display. When you next transmit,
the low-power transmit symbol
appears in the display and the red LED glows.
2
Press the low-power transmit function key again to turn
low-power transmit off, and the message Low power
tx deactivated appears in the display.
Low power
Tx
activated