Tait TM8250 Operator's Manual - Removing The Microphone

130 Troubleshooting

Removing the microphone

1

Using your thumb or forefinger, lift up 

one of the corners of the microphone 

grommet. Firmly (but gently) pull that 

corner until the seal comes away from 

the cavity.

2

Repeat to expose another corner.

3

Pull the exposed corners back and slide the grommet up 

the microphone cable to reveal the microphone plug.

4

Remove the plug from the microphone socket.

Notice The microphone grommet must be installed when-

ever the microphone is plugged into the microphone socket. 

When installing a microphone, follow the instructions in the 

section 

“Installing the microphone” on page 49

.

Reinstalling the microphone

Notice The microphone grommet must be installed when-

ever the microphone is plugged into the microphone socket.

1

Plug the microphone into the microphone socket.

2

Slide the microphone grommet along the microphone 

cord and push two adjacent corners of the grommet into 

the microphone socket cavity.

3

Squeeze the grommet and push the remaining corners 

into position.

4

Check that the grommet is seated correctly in the cavity.

grommet

microphone

grommet

control head