Tait TM8250 Operator's Manual - Select.
66 Operating in conventional mode
6
To turn repeater talkaround off, either change the chan-
nel or choose Off in the Talkaround menu and press
Select.
Receiving a call
When there is valid activity on your radio’s currently selected
channel or group, the radio then unmutes and you can
hear the call.
If the incoming call contains special signalling that matches
the signalling programmed for your radio, the green LED
flashes and your radio may give a ringing tone.
Receiving a text message
Your radio may be able to display received text messages in
conventional mode. If programmed, the queuing icon
(empty queue) or (message in queue) is always shown in
the default display while in conventional mode.
Viewing a text message
When a text message is received,
the radio sounds two short high-
pitched beeps. If the radio is
currently showing the default
display, the message appears
immediately.
To view a message that does not appear immediately:
1
Navigate to the default display (for example, press and