Tait TM8250 Operator's Manual - page 33

Getting started 33

■

wait until other users have finished before using the 

radio. The radio may be in use if the red transmit LED is 

glowing, there is audio from the speaker, or there is user-

related activity (such as scrolling) on the display.

■

you can change the display contrast and the volume with-

out impacting on other users.

■

features such as backlighting and indicator volume apply 

to all control heads. Consider other users before changing 

these features of the user interface.

Listening to outgoing transmissions

Your radio may be programmed so you can hear outgoing 

transmissions initiated from other control heads. You may 

need to remove the microphone from the microphone clip to 

hear these transmissions.

Identifying your control head type

Some actions apply to the primary control head only, such as 

adjusting the volume of a remote speaker.

To check whether your control head 

is the primary or secondary head:

1

Select Menu>Radio settings>

Radio info>Multi head info.

2

Press Select to view the control 

head type.

In the example shown, the 

control head is the primary head.

Radio info

Key settings

2

Multi head info

Back

Select

Head status: 

primary

Back