Tait TM8250 Operator's Manual - Press Edit.
Operating in conventional mode 79
Changing the signalling used on a channel
You may be able to change the subaudible signalling used on
a channel. This enables you to communicate with a different
group of users on the same channel. The change may be
permanent, or may be reset after you restart the radio using
the on/off key. A channel with signalling that has changed
has an asterisk
immediately after the label.
1
Select the channel. See
“Selecting a channel” on
page 45
.
2
Press Edit.
If there is no edit option for the
left selection key, the channel’s
signalling cannot be changed.
3
In the Prog signalling menu,
scroll through the list of signal-
ling pairs until the signalling you
want appears.
4
Press Select.
If successful, the message New
signalling applied appears.
The default display then appears,
with an asterisk
immediately
after the channel label.