Tait TM8250 Operator's Manual - page 17
For your safety 17
Electromagnetic compatibility in European vehicles
In the European Community, radio equipment fitted to
automotive vehicles is regulated by Directive 72/245/EEC
and its amendments. The requirements of this directive cover
the electromagnetic compatibility of electrical or electronic
equipment fitted to automotive vehicles.
To meet the requirements of Directive 72/245/EEC and its
amendments, installation of this product in a vehicle must be
performed according to the instructions provided by the
vehicle manufacturer.
Notice Failure to install the product correctly may void the
vehicle’s type-approval. The owner could be held responsible
for any damage resulting from vehicle failure that can be
attributed to RF energy interfering with the vehicle systems.
Unapproved modifications or changes to radio
The radio is designed to satisfy the applicable compliance
regulations. Do not make modifications or changes to the
radio that are not expressly approved by Tait Limited. Failure
to do so could invalidate compliance requirements and void
the user’s authority to operate the radio.
High radio surface temperatures
Caution The bottom surface of the radio and the heatsink
fins can become hot during prolonged operation. Do not
touch these parts of the radio.
EN 60950 requirements (25 watt radios)
This radio complies with the European Union standard
EN 60950 when operated up to the rated 33% duty cycle of
two minutes transmit and four minutes receive, and with
ambient temperatures of 30°C or lower.
Caution Operation outside these limits may cause the
external temperature of the radio to rise higher than this
standard permits.