Tait TP9300 User Manual - page 102
102 Operating in trunked mode
4
Check that orange LED is glowing and the network
icon
appears on the display.
Selecting a workgroup
1
Press
Menu
and select
Set workgroup
.
(Depending on how your radio is programmed, you
may be able to use the scroll keys or left selection
key to select a workgroup.)
(Depending on how your radio is programmed, you
may be able to use the scroll keys, left selection
key or channel selector to select a workgroup.)
2
In the
Set workgroup
menu, scroll through the list
of workgroups until the workgroup you want
appears.
3
Press
Select
.
4
Check that orange LED is glowing and the network
icon
appears on the display.
Making a call to a workgroup
Different types of calls may be associated with your
workgroups. These calls can be individual calls,
preset calls, broadcast calls (no response permitted),
or conference calls.
To make a call to a workgroup:
1
Select the required zone. See
2
Select the required workgroup. See
.
3
Press the PTT key, and a call to that workgroup is
made.
Select
Back
Main menu
Set workgroup
Go to homegroup