Tait TP9300 User Manual - Making An Individual Call
78 Operating in conventional mode
The radio warns you before the transmit timer expires
by beeping three times. The red status LED flashes
and the message
Transmit timeout imminent
appears in the display.
The message
Transmit Timeout Imminent
appears
on the display.
If the transmit timer has timed out, you must release
the PTT before you can transmit again.
Your radio may be unable to transmit for a short
time after the transmit timer has expired.
Making an individual call
This feature is available for digital channels only.
To make a call to one person rather than a group of
people:
1
Press
Menu
and select
Individual call
.
(The person to whom you last made an individual
call is highlighted.)
(Depending on how your radio is programmed, you
may be able to press a function key or use your
Quick Access menu to select individual calls.)
2
Scroll to the person you want to call and press the
PTT key to make the call immediately.
Making a preset call
You may be able to use your radio to make preset
calls to an individual or a specific group using special
signaling known as ‘Selcall’.
Preset individual or group calls can be assigned to
each channel and/or function key.
To make a preset call:
Individual call
Car 2
Car 1
Back