Tait TP9300 User Manual - Removing The Microphone
Troubleshooting 157
Removing the microphone
For information on installing or removing your
radio from a vehicle, refer to the
Installation
Guide
.
1
Using your thumb or forefinger, lift up one of the
corners of the microphone grommet and firmly (but
gently) pull that corner until the seal comes away
from the cavity.
Notice
Remove the grommet carefully as it serves
two important functions. Firstly, it prevents damage to
the microphone socket due to movement of the
microphone cord, and secondly, it ensures that the
control head is sealed against water, dust, and other
environmental hazards.
2
Repeat to expose another corner.
3
Pull the exposed corners back and slide the
grommet up the cable to reveal the microphone
plug.
4
Remove the plug from the microphone socket.
General care
Your radio requires no regular maintenance other
than ensuring that all the cables and connections are
secure, and that no damage has occurred to the
antenna or wiring.
Notice
To prevent permanent damage to the radio
cover, do not allow the radio to come into contact with
detergents, alcohol, aerosol sprays or petroleum-
based products.
Your radio requires no regular maintenance other
than ensuring that the battery has sufficient charge
and that no damage has occurred to the antenna or
the battery.
microphone
grommet