Tait TP9300 User Manual - Transmitting At Low Power
Operating in conventional mode 85
To cancel a call that is being resent:
■
Press the PTT key.
Transmitting at low power
If you are using your radio in conditions where signal
strength is high, you can extend the shift life of your
battery by transmitting at low power.
If you are using your radio in conditions where signal
strength is high, you can reduce the drain on your
vehicle battery by transmitting at low power.
When low power transmit is turned on, appears in
the display and calls are made at low power rather
than at the programmed power setting.
Some channels may always transmit at low power.
To turn low power transmit on or off for all channels:
Using the Main Menu
1
Press
Menu
and select
Radio settings
>
Functions
>
Low power tx
.
(Depending on how your radio is programmed, you
may be able to press a function key to turn low
power transmit on or off.)
2
Scroll to
On
(or
Off
) and press
Select
. (The current
setting is highlighted.)
The message
Low power tx activated
(or
deactivated
) appears in the display.
Using a function key
1
Press the function key programmed for low-power
transmit to transmit at low power on your current
channel.
Select
Back
Low power tx
Off
On