Tait TP9300 User Manual - Placing The Radio In
Operating in trunked mode 117
Receiving a text message
If the radio is programmed for call queuing, incoming
text messages are added to the queue. For more
information, see
"Checking the queue" on page 110
.
Press
Options
and select whether to reply, call or
delete.
Placing the radio in
do-not-disturb mode
If you do not want calls for a while, you can place the
radio in do-not-disturb mode, so that incoming calls
can be ignored. You can make outgoing calls in the
usual way.
While do-not-disturb mode is active, incoming
calls cannot be stored in the call queue.
Using a function key
1
Press the function key programmed for do not
disturb, to activate the do-not-disturb function.
The message
Do not disturb activated
appears
on the display. Your radio will now ignore all
incoming calls.
2
To deactivate the do-not-disturb function, press
the do-not-disturb function key again.
The message
Do not disturb deactivated
appears on the display.
Using the Main menu
1
Press
Menu
and select
Radio Settings
>
Call Settings
>
Do not disturb
.
2
In the
Do not disturb
menu, choose
On
.
3
Press
Select
.
The message
Do not disturb activated
appears
on the display. Your radio will now ignore all
incoming calls.