Tait TP9300 User Manual - Making An Emergency Call

 Operating in conventional mode  83

7

Once the call has finished, press 

End

.

Your radio may send tones to release the line.

Making an emergency call

You may be able to activate emergency mode by 

using a programmed function key.

1

Press the function key programmed for 

Emergency Mode and an emergency call is sent to 

your dispatcher, or some other predetermined 

location.

While emergency mode is active, your radio may 

cycle between receive and transmit, so that your 

dispatcher can hear any activity near the radio. 

Alternatively, your radio may appear to turn off but 

will actually remain in emergency mode.

2

Reset the radio to normal operation at any time by 

turning the radio off and then on. 

Emergency mode may be programmed to end 

after a fixed period of time. In this case, there is 

no need to turn the radio off and then on in order 

to return the radio to normal operation.

Sending a status message

For analog channels, your radio may be able to 

maintain a record of your current status. This status 

may be sent with outgoing calls programmed to 

contain status information. If the radio receiving your 

message has been programmed with the same status 

messages, it will decode and display your message. 

The message indicates your current activity or 

location, such as “en route” or “at lunch”.

To change you current status: