Tascam DM-3200 Release Notes - Dm-3200 Release Notes
DM-3200 Release Notes
TASCAM DM-3200 Release Notes
19
Version 1.20
Rare instances of routing crosstalk have been addressed
•
Automation data file handling has been improved
•
Where the CF card is close to full
•
When creating a new project
•
When using the Keep function
•
Pink noise generated by the oscillator is now more accurate
•
Rare instances of not being able to exit Initial Edit after
•
writing automation have been addressed
Rare instances of
•
CTRL
+
STORE
over-writing protected
data have been addressed
CASCADE Connection ended.
Please choose new clock master.
Set Internal Clock?
Press
ENTER
to confirm,
or cursor key to cancel.
When you press the
ENTER
key, the clock master will be
set to Internal.
STORE button in the library/automation
ª
LCD screen
When you press the
STORE
button in the various screens,
the resulting operation had been the same as when press-
ing the
STORE AS
button. This has been changed so that
the operation is the same as when you press the top panel
STORE
key.
The file name used when you store by pressing the
STORE
button in the
AUTOMATION>FILES
screen is now the same as
when you store by pressing the
KEEP
key.
ª
DTRS REC FUNCTION setting when con-
trolling via P2
When making REC function settings with multiple DTRS
devices connected, and the REC function of track 9 or later
is operated from the DTRS unit, that status is not reflected
in the mixer.
ª
Auto detection of MMC control target
When loading a project that includes MMC Full (closed-
loop) control, be sure to connect and power on the MMC
device first. Also, power on the MMC device before start-
ing the mixer, otherwise the MMC device may not be
correctly identified or controlled.
ª
USB Connection notes
Mac OS X:
If TMC or your DAW software fails to find your
mixer after putting your computer into Sleep mode,
please remove the USB cable and re-connect it before
re-launching TMC or your DAW software.
Windows XP:
If TMC or your DAW software fails to find your mixer after
putting your computer into Standby mode or Hibernation
mode, please re-launch TMC or your DAW software.
Windows Vista:
If TMC or your DAW software fails to find your mixer
after putting your computer into Standby mode, Sleep
mode or Hibernation mode, please re-launch TMC or your
DAW software again.
To prevent this problem re-occuring, please set your
computer to not automatically go into Standby or
Hibernation modes.
ª
Multiple IF-AE/DM cards and clock master.
If one of the IF-AE/DM cards is selected as the clock
master, attempting to switch the master clock to another
IF-AE/DM card will result in noise in the mixer. To avoid
this, do not change the clock source.
Version 1.60
Known Issues
This section describes the Known Issues for the latest DM-3200 software