Tascam DM-3200 Release Notes - Dm-3200 Release Notes
DM-3200 Release Notes
TASCAM DM-3200 Release Notes
9
FireWire card support
By installing an IF-FW/DM
FireWire interface card (sold separately), it is now possible to
transfer audio data between your computer and a DM-3200.
An IF-FW/DM card can only be installed into
Slot 1
.
Surround monitor card support
Integrated surround
monitoring can be added to the DM-3200 by installing an
IF-SM/DM surround monitor card (sold separately), An
IF-FW/DM card can be installed into either
Slot 1
or
Slot 2
.
Naming the mixer
DM-3200 V1.20 allows you to set
and edit mixer names.
Remote operation through MMC
Now you can
remotely operate external transports from a DM-3200 using
the MMC (MIDI Machine Control) protocol.
MIDI control
External MIDI devices can be controlled
from the DM-3200 using MIDI Control Change and
Program Change Messages using the new external con-
trollers:
MIDI fader
,
MIDI controller
, and
MIDI mixer
.
Assigning parameters to rotary encoders
DM-3200 now allows you to assign which parameters are
controlled from the rotary encoders.
Cascade connection
A cascade connection can be
made between two DM-3200 units.
GPI functionality
DM-3200 can now remotely control
external devices using a GPI signal output.
Expanded dynamic automation function
The
dynamic automation function of the DM-3200 can now
capture buss assignments, effect parameters, and image
parameters.
ª
FireWire card support
By installing an IF-FW/DM FireWire interface card (sold
separately) into
Slot 1
of the DM-3200 V1.20, you can trans-
fer audio data between your computer and the DM-3200. An
IF-FW/DM inserted into
Slot 2
will not function.
Figure 1 is an example of the panel display when an
IF-FW/DM card is installed in
Slot 1
.
For more details, please refer to the IF-FW/DM documentation.
ª
Surround monitor card support
By installing an IF-SM/DM surround monitor card (sold
separately), you can add integrated surround monitoring to
the DM-3200.
Figure 1 shows an example of the screen display when
IF-SM/DM card is inserted in
Slot 2
.
For more details, please refer to the owner’s manual that
comes with the IF-SM/DM card.
Figure 1: SLOT screen when an IF-FW/DM and an
IF-SM/DMare installed
ª
Naming the mixer
DM-3200 V1.20 allows you to set and edit mixer names so
that you can easily differentiate between multiple mixers
with the TASCAM Mixer Companion computer applica-
tion.
1 On the
UTILITY SYSTEM
screen, move the cursor to
the
EDIT
button in the
MIXER NAME
section. Press the
ENTER
key.
Figure 2: UTILITY>SYSTEM screen
A pop-up window will appear for editing the mixer
name.
Figure 3: Name edit pop-up screen
Version 1.20