Tascam DM-3200 Release Notes - Dm-3200 Release Notes
DM-3200 Release Notes
TASCAM DM-3200 Release Notes
5
For details on each type and on the preset library, refer to
the separate EFFECT LIST, which are provided as elec-
tronic publications in PDF format.
This can also be downloaded from the TASCAM website
TASCAM FX2.0 recall
TASCAM FX2.0 recall is performed in the
LIBRARY>EFFECT
screen shown in the right column.
Figure 5 LIBRARY>EFFECT1 screen
Presets for the various TASCAM FX 2.0 effects are provid-
ed in preset bank 3 of the effect library.
The settings from this preset bank 3 are recalled into the
two effect DSP units of the DM3200 for use.
Both of the two units can use TASCAM FX 2.0 effects
simultaneously.
TASCAM FX Compressor GR meter indi-
ª
cation
A gain reduction meter has been added for the established
TASCAM FX effects. This meter is displayed in the
effects screen when the Guitar Compresser and compress-
er is loaded.
Figure 6 Example screen for Logic control
When the separately sold IF-FW/DM MKII option card is
installed, you can now transfer up to 32 channels of I/O (at
44.1kHz/48kHz/88.2kHz/96kHz) between your computer
and the DM-3200.
For details on the IF-FW MKII, refer to the IF-FW MKII
operating manual.
DAW control screen display of channels
ª
1-16
In each DAW control screen, you can now view all sixteen
channels in a single screen.
The following illustration is an example screen for Logic
control.
Figure 5 Example screen for Logic control
ª
Windows Vista
This version of the DM-3200 is now fully supported by
Windows Vista 32 bit and Vista 64 bit.
It is possible to do remote control of DAW Applications
that run under Windows Vista and transfer MIDI messages
between the DAW software and the mixer.