TATA Motors 2013 SAFARI STORME Owner's Manual & Service Book - page 146
TECHNICAL INFORMATION
136
FRONT AXLE
For 4 X 4
Independently suspended with
Axle Disconnect. Ratio:4.1
For 4 X 2
Independently suspended
STEERING
Type
Rack and Pinion steering with
power assistance. (Hydraulic)
Ratio
17.5:1
Steering Wheel
380 mm dia. with Low pivot tilt
mechanism for adjusting height &
collapsible column
BRAKES
Service Brake
Vacuum assisted independent
hydraulic brakes on front & rear
through tandem master cylinder.
Vacuum pump camshaft driven
Front Brakes
Ventilated disc brakes
Disc dia. 302 (4X4) / 298 (4X2)
Disc thickness : 26
C48 X 48 twin pot caliper with 8”+9”
tandem booster with dia. 26.99,
TMC pedal ratio : 4.2
Rear Brake
C48 X 48 single pot caliper with DIH
(Drum in hat, drum dia. 206
Disc dia. 316)
TECHNICAL SPECIFICATIONS
Load conscious
Load sensing pressure valve
pressure reducing
(LSPV) provided for non-ABS
Valve
version
Parking Brake
Lever type, Console mounted, cable
operated mechanical linkage acting
on rear wheels through DIH.
Anti-lock Braking
4 channel , 4 sensors (For ABS)
System (ABS)
FRAME
Type
Ladder type cranked frame with
boxed section members & welded
cross members. Tow hook at the
front and rear.
Depth
152 mm (Max)
Width
80 mm (Max)
SUSPENSION
Front
Double wishbone type with coil
springs over shock absorber.
Rear
Coil spring type 5 link rigid axle
suspension
Shock Absorber
Hydraulic double acting telescopic at
Front & Rear
Anti-roll Bar
At both front & rear