TATA Motors 2013 SAFARI STORME Owner's Manual & Service Book - page 43
33
GETTING STARTED
STEERING WHEEL ADJUSTMENT & TRANSFER CASE ELECTRIC SHIFT SWITCH
STEERING WHEEL POSITION
ADJUSTMENT:
You can adjust the steering wheel
position to suit your convenience.
Adjust the steering wheel position as
follows before you start driving.
1. Adjust the seat to the comfortable
position.
2. The lever to tilt the steering wheel is
under steering column. Push the
lever down to unlock the steering
column.
1. Lock Position 2. Unlock Position
TRANSFER CASE ELECTRIC SHIFT
SWITCH (Only for 4X4 vehicle) :
Your vehicle has the transfer case
selector switch on the floor console near
the gear shift lever. This is electrically
operated switch, it helps in shifting from
4X2 to 4X4 mode or vice-versa.
This switch has three selector
positions :
2H - Only two rear wheels are driven.
4H - All four wheels are driven.
4L - All four wheels are driven ( vehicle
runs at a speed reduction ratio to
deliver higher torque)
3. Move the steering wheel up or down
to the desire position. Position the
wheel such a way that all the
instrument panel gauges and
warning lights are visible.
4. Pull the lever upward to lock the
steering column once steering
column position is fixed. Make sure
that steering wheel is securely locked
by moving up and down.
CAUTION
Steering wheel should be adjusted only
when the vehicle is stationary.