TATA Motors 2013 SAFARI STORME Owner's Manual & Service Book - page 60
DRIVING CONTROLS
50
INSTRUMENT CLUSTER - GAUGES
Do not increase the engine rpm
unnecessarily.
Fuel gauge :
The fuel gauge indicates the approximate
fuel level in the tank.
Refill the fuel tank before the needle
touches the coloured band on the gauge.
At this point, fuel level in tank is low and
it is advised to get fuel filled immediately.
Multifunctional LCD, Odometer,
Dimmer and Trip meter (A and B),
Digital clock, ambient temperature:
LCD has two line displays. The first line
displays the Odometer count. The
second line displays either of Trip meter
A, Trip meter B, Dimmer and Intensity
level of panel illumination, Ambient
temperature and Digital clock display.
The selection and control of functions are
done through 'MODE' and 'SET' push
buttons (knobs) provided on either side
of the LCD.
The 'MODE' knob is used to select one
of Trip meter A, Trip meter B, Ambient
temperature, Digital clock display and
Intensity level of panel illumination.
Odometer and trip meter (on LCD):
The odometer record the total distance
the vehicle has been driven. The trip
meter can be used to measure the
distance travelled on each trip or between
fuel fillings. Keep track of the odometer
reading and follow the maintenance
schedule regularly for meeting service
requirements.
Ambient temperature :
Ambient Temperature is measured and
displayed in the units °C or °F, which
you can select by pressing the MODE
and SET switch.
You can select required function on LCD
by using MODE and SET knobs available
on cluster, as indicated in the table
further.
Please note that each knob has to be
pressed and released to change the
function.