V2 VEGA-24V User Manual - 2 - Technical Data
E
N
G
L
IS
H
40
Power supply
85-245 V / 50-60 Hz
Motor rated voltage
24 Vdc
Maximum power
100 W
Rated power
150-180 W
Idling current
38 mA (230V) / 65 mA (120V)
Maximum power from line
1,25 A (230V) / 2,2A (120V)
Motor rated speed
1,6 Rpm
Working temperature
-20 ÷ +50 °C
Protection degree
IP20
Working cycle
30 %
Motor weight
9 Kg
Maximum accessory load 24V
15 W
Protection fuses
T1,6A - 250V
2 - TECHNICAL DATA
1.2 - TECHNICAL ASSISTANCE SERVICE
For any installation problem please contact our Customer Service at the number +39-0172.812411 operating Monday to Friday
from 8:30 to 12:30 and from 14:00 to 18:00.
1.3 - EC DECLARATION OF INCORPORATION FOR PARTLY COMPLETED MACHINERY
(DIRECTIVE 2006/42/EC, ANNEX II-B)
The manufacturer V2 S.p.A., headquarters in Corso Principi di Piemonte 65, 12035, Racconigi (CN), Italy
Under its sole responsibility hereby declares that:
the partly completed machinery model(s):
VEGA-24V
Identification number and year of manufacturing: typed on nameplate
Description: Electromechanical actuator for balanced door
• is intended to be installed on garage door, to create a machine according to the provisions of the Directive 2006/42/EC.
The machinery must not be put into service until the final machinery into which it has to be incorporated has been declared in conformity
with the provisions of the Directive 2006/42/EC (annex II-A).
• is compliant with the applicable essential safety requirements of the following Directives:
Machinery Directive 2006/42/EC (annex I, chapter 1)
Low Voltage Directive 2006/95/EC
Electromagnetic Compatibility Directive 2004/108/EC
Radio Directive 99/05/EC
The relevant technical documentation is available at the national authorities’ request after justifiable request to:
V2 S.p.A., Corso Principi di Piemonte 65, 12035, Racconigi (CN), Italy
The person empowered to draw up the declaration and to provide the technical documentation:
Cosimo De Falco
Legal representative of V2 S.p.A.
Racconigi, 05/04/2012