V2 VEGA-24V User Manual - page 44
Manual is about: 24V ELECTROMECHANICAL ACTUATOR FOR SLIDING DOORS BUILT-IN DIGITAL CONTROL UNIT
of
148
E
N
G
L
IS
H
42
6.
Check that the tube is perfectly horizontal and
perpendicular as to the telescopic arm, then cut the
part of exceeding tube
7.
Drive the door to its max. opening position and cut
the
g 1
upper part of the telescopic arm so that there
is a
g 2
100-mm lower part projection by the upper
side.
8.
Drive the door to its closing position and cut the
telescopic arm lower part so that the
g 3
inner part is
of 100 mm