Vallox 096 MV Manual - page 18

18

EXPERT SETTINGS

Lock code and access rights

NOTE

The default lock code is 0000, i.e. the lock code inquiry is 

turned off.

1.  Enter the first digit of the lock code using the 

Up arrow

 and 

Down arrow

 buttons. Proceed to the next digit by selecting 

Right arrow

.

2.  Set the remaining digits of the lock code in the same way.

3.  Select 

OK

.

4.  The lock code is now set.

User level

There are three user levels:

•  Extensive 

- At the extensive user level, users can access all 

ventilation unit settings.

•  Normal

 - At the normal user level, access to some menus is 

restricted.

•  Limited

 - At the limited user level, users have access only to 

the basic functions of the ventilation unit.

For more information on user levels, see Chapter “User level 

diagrams”.

1.  Use the 

Plus

 and 

Minus

 buttons to set the user level.

2.  The user level is now set.

3.  Proceed to the next phase by selecting 

Right arrow

.

Parental controls

Parental controls lock the control panel so that no damage 

can be done to the ventilation unit by random pressing of the 

control panel buttons.

1.  By default, the parental controls are turned off. Use the 

Plus

and 

Minus

 buttons to turn the parental controls on.

2.  Select 

OK

.

3.  The parental controls are now set.

TIP

You can browse the 

Lock code and access rights

 settings with 

the 

Right arrow

 button.

NOTE

The access code of the parental controls cannot be changed. 

The access code is always 

1001

.

Parental controls access code:

1 

 0 0 1

Enter the new access code 

here:

SETUP WIZARD