Vallox 096 MV Manual - Week Clock

30

Setting the date

1.  Select

 Settings > Time and date.

2.  Select 

OK

.

3.  Select 

Right arrow

 until the 4/4 display opens.

4.  Use the 

Plus

 and 

Minus

 buttons to set the date.

5.  Select 

Right arrow

.

6.  Use the 

Plus

 and 

Minus

 buttons to set the month.

7.  Select 

Right arrow

.

8.  Use the 

Plus

 and 

Minus

 buttons to set the year.

9.   Select 

OK

.

WEEK CLOCK

The week clock allows you to pre-set a weekly ventilation 

program for the ventilation unit. For each hour of the week, 

one of the following profiles can be configured:

•  At home

 — The 

At home

 profile is used.

•  Away

 — The 

Away

 profile is used.

•  Boost

 — The 

Boost

 profile is used.

•  Blank — Do not change the profile.

NOTE 

If you change the profile manually when the week clock is 

on, the selected profile will be active until the week clock 

switches to the next profile in the program.

If the humidity or carbon dioxide sensors control the 

ventilation, they will adjust the fan speed, regardless of 

whether the profile has been manually selected or selected 

by the week clock.

Turning the week clock on

1.  Select 

Settings > Week clock off.

2.  Select 

OK

.

3.  Select 

Settings

.

4.  Select 

Turn on.

5.  Select 

Select

.

6.  The control panel confirms that the week clock is turned 

on.

USING THE UNIT

SETTINGS

TIP

You can turn the week clock on 

or off by pressing the OK button 

on the Week clock display for a 

few seconds.