Vallox 096 MV Manual - page 79
79
© Vallox Oy - All rights reserved
79
© Vallox Oy - All rights reserved
Air flow measurement points
A Supply air
B Extract air
Measurement points after the outlet collar. The
fan curves indicate the total pressure accounted
for by duct losses.
A
B
Main parts
1. Extract air fan
(behind the protective
cover)
2. Supply air fan
(behind the extract air
duct)
3. Supply air filter F7
4. Heat recovery cell
R model in the figure.
In the L model, the parts are mirrored
5. Bypass flap
6. Supply air filter G4
7. Extract air filter G4
8. Post-heating radiator
(behind the extract air duct)
9. Safety switch
10. Additional heater(behind the
extract air duct)
Dimensions and duct outlets
Dimensions
Duct outlets
R model
Inner diameter of the female collar: 200mm
1. Supply air from the unit to the apartment
2. Extract air from the apartment to the unit
3. Exhaust air flowing outdoors from the unit
4. Outdoor air to the unit
L model
Inner diameter of the female collar: 200mm
1. Exhaust air flowing outdoors from the unit
2. Outdoor air to the unit
3. Supply air from the unit to the apartment
4. Extract air from the apartment to the unit
73
9
717
74
8
56
0
578
12
7
411
717
125
455
180
537
200
3
1
4
2
43 (28)
TECHNIC
AL SPECIFIC
ATIONS