Vallox 096 MV Manual - Filter Settings

27

© Vallox Oy - All rights reserved

USING THE UNIT

SETTINGS

FILTER SETTINGS

1.  Select 

Settings > Filters.

2.  Select 

OK

.

3.  The summary display of filter replacement shows the 

following information:

•  Filters replaced

 — Indicates the date when the filters were 

last replaced.

•  Next reminder

 — Indicates the date when a reminder to 

replace the filters will next be shown.

•  Reminder interval

 — Indicates the filter replacement interval 

in months.

Setting the date the filters were last 

replaced

Instructions for replacing the filters are provided in the 

Maintenance section.

After replacing the filters, enter the replacement date.

1.  Select 

Settings > Filters.

2.  Select 

OK

.

3.  Select 

Edit

.

4.  Select 

Plus

 on the Filter replacement display. The 

Last 

replaced

 field now reads 

Today.

5.  Select 

OK

.

NOTE 

Based on the set reminder interval, the unit will automatically 

set the service to provide a reminder to replace the filters at 

the due time.

Setting the Filter replacement reminder 

interval

1.  Select 

Settings > Filters.

2.  Select 

OK

.

3.  Select 

Edit

.

4.  Select 

Right arrow

.

5.  Use the 

Plus

 and 

Minus

 buttons to set the desired 

reminder interval in months in the Reminder interval field. 

The interval value can be between 1 and 12 months. The 

default setting is 4 months.

6.  Select 

OK

.